Miller Electric, 951000070, MIG Welder, 110/115/120 V; 220/230/240 V, 20-230 A, 8 in. Spool Size

The Multimatic 220 AC/DC is the only machine in its class that offers users the ability to switch welding gas, polarity and welding process automatically while recalling the last MIG or TIG settings.

Features

• Provides High-Frequency, non-contact arc starting to eliminate tungsten and material contamination time after time.
• The standard 14-pin connector lets you choose your control for a customized experience, whether it’s a foot control, fingertip control, or wireless foot control.
• Take on more projects with one machine that has MIG, Stick, AC and DC TIG.
• The Multimatic 220 will be able to operate and provide full output when powered by generators with 10000 Watt (10K) output or higher, such as a Miller Bobcat or Trailblazer series generator. Limited output will occur when used with smaller generators.
• Eliminates the guesswork when setting weld parameters. Simply adjust control until Pro-Set™ appears on the display and the number turns blue. Available for AC Balance and Frequency (TIG), DC Pulse (TIG), and DIG (Stick).
• Allows for connection to 120- or 240-volt receptacles without tools. Choose the plug that fits the receptacle and connect it to the power cord.
• The Multimatic® 220 AC/DC can go where the work is, plus the added convenience of one machine versus two or more.
• Superior Stick arc performance even on the difficult-to-run electrodes like E6010.
• Automatically determines the polarity. MIG gun and TIG torch can stay connected at the same time. Automatically switches to the right process. Just hit the trigger or the foot control and the machine automatically changes. Automatically recalls the settings from the last process used.

Includes

• Spool of Hobart® .030 in (0.8 mm) solid wire
• Multimatic® 220 AC/DC
• 12.5 ft (3.8 m) Weldcraft™ A-150 (WP-17) TIG torch with 25mm Dinse-style connector
• 10 ft (3 m) work cable with clamp and 25 mm Dinse-style connector
• AK2C TIG torch accessory kit
• Quick Select™ drive roll for .024 in (0.6 mm) or .030/.035 in (0.8/0.9 mm) solid wire, and .030/.035 (0.8/0.9 mm) flux cored wire
• Hook-and-loop cord wraps
• 13 ft (4 m) cable electrode holder and 25 mm Dinse-style connector
• Two Argon and AR/CO2 mix regulator/flow gauge with hoses
• Material thickness gauge #229895
• RFCS-14 HD foot control with 20 ft (6 m) cord
• 10 ft MDX™-100 MIG Welding Gun
• Dual Cylinder Running Gear
• 6.5 ft (2 m) power cord and MVP™ adapter plugs for 120V and 240V
• Two contact tips for .030 in (0.8 mm) wire

Does Not Include

• Shielding gas
• Spool gun for aluminum welding
• Safety Equipment

• Input Voltage: 110/115/120 V, 220/230/240 V
• Current Type: AC / DC
• Weld Output: CC / CV
• Amperage Range: 20 A - 230 A
• Max Open Circuit Voltage: 46 VDC
• Max Wire Feed Speed: 600 IPM (15.2 m/min)
• Min Wire Feed Speed: 60 IPM (1.5 m/min)
• Spool Size: 8 in.
• Spool Wire Diameter: .024 in (0.6 mm), .030/.035 in (0.8/0.9 mm)
• Welding Processes: MIG, Stick, AC TIG, DC TIG
• Material Thickness Display: Mild Steel 24 ga. - 3/8 in. (MIG), Mild Steel 16 ga. - 3/8 in. (Stick), Mild Steel 24 ga. - 1/4 in. (TIG), Aluminum 24 ga. - 1/4 in. (TIG), Aluminum 18 ga. - 3/8 in (MIG)
• Wire Feed Speed Display: 1.5 m/min - 15.2 m/min (60 IPM - 600 IPM)
• Connector Type: 14-pin, 25 mm Dinse-style
• Regulator: Two Argon and AR/CO2 mix regulator/flow gauge with hoses
• Running Gear: Dual Cylinder
• Power Cord Length: 6.5 ft (2 m)
• Welding Torch Length: 12.5 ft (3.8 m)
• Work Cable Length: 10 ft (3 m)
• Electrode Holder Cable Length: 13 ft (4 m)
• Foot Control Cord Length: 20 ft (6 m)
• MIG Welding Gun Length: 10 ft
• Generator Power Requirement: 10000 Watt (10K) or higher
• Country of Origin: United States
• Weldable Metals: Aluminum, Stainless Steel, Steel

Downloads