Miller Electric, 907431, MIG Welder, 5 A - 425 A, 208 V; 220/230/240 V; 380/400/440 V; 460/480 V; 575 V, CC/CV

MIG and synergic Pulsed MIG system with optimized weld programs for both steel and aluminum.

Features

• Provides TIG appearance with MIG simplicity and productivity. Achieve “stacked dimes” without gun manipulation. Profile Pulse frequency can be changed to increase or decrease the spacing between the ripple pattern to achieve the desired weld appearance.
• As wire speed increases/decreases, pulse parameters also increase/decrease to match the right amount of power needed, eliminating the need to make additional adjustments.
• Dedicated XR™-Pistol Plus and XR-Aluma-Pro™ Plus guns work with the 74 MPa Plus feeder to coordinate wire feed speed of the gun and the feeder. This provides optimized aluminum feeding and welding performance.
• Automatically set the optimal parameters for a wide variety of wires making it easy to set up and use.
• Cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through machine.
• Allows hookup to either single-phase or three-phase primary input voltage, 208-600 volts dependent on the machine, with no manual linking, providing convenience in any job setting. An ideal solution for dirty or unreliable input power.
• Internal air flow that protects internal components from dirt, dust, debris— greatly improving reliability.
• Fine tunes puddle fluidity in Pulsed MIG (GMAW-P) welding.

• Input Voltage: 208 V, 220/230/240 V, 380/400/440 V, 460/480 V, 575 V
• Amperage Range: 5 A - 425 A
• Input Frequency: 50/60 Hz
• Rated Output: 10-38 V, 5-425 A
• Current Type: DC
• Weld Output: CC / CV
• Maximum Tensile Strength: 352 MPa
• Length: 24 in.
• Width: 12.5 in.
• Height: 17 in.
• Weight: 80 lb
• Weldable Metals: Aluminum, Specialty Metals, Stainless Steel, Steel
• Country of Origin: United States

Downloads