Lincoln Electric, K4442-1, Teaching Aid Toolbox, Comprehensive Welding Tools; Cutaway Oxyfuel Torch; Weld Sample Coupons; Discontinuities Flash Cards

WELDING TRAINING, UP CLOSE AND PERSONAL Curriculum in a CabinetComprehensive array of tools and accessories from various welding and cutting processesCutaway Harris® gas regulator and oxyfuel torch allow students to get familiar with the tool's structure, operation and applicationBuild on the BasicsThe Teaching Aid Toolbox is fully supported with Lincoln Electric U/LINC® curriculum lesson plans and moreBridge the Classroom and the LabBring actual welding and cutting tools into the classroom to better illustrate the principles of each processBoosts learning to the next level of understanding by illustrating joints, cuts, equipment and related techniquesIncluded weld sample coupons allow instructors to illustrate various welding joints and typical beadsA set of weld discontinuity flashcards allow you to show and discuss common weld flaws

Features

• Fully supported with Lincoln Electric U/LINC curriculum lesson plans and more
• Boosts learning to the next level of understanding by illustrating joints, cuts, equipment and related techniques
• Cutaway Harrisgas regulator and oxyfuel torch allow students to get familiar with the tool's structure, operation and application
• Comprehensive array of tools and accessories from various welding and cutting processes
• Bring actual welding and cutting tools into the classroom to better illustrate the principles of each process
• Drawer 5-Weld Samples: Butt Joint - 2 x 6 in. (50.8 x 152.4 mm) 10ga, Corner Joint - 2 x 6 in. (50.8 x 152.4 mm) 10ga, Edge Joint - 2 x 6 in. (50.8 x 152.4 mm) 10ga, Lap Joint - 2 x 6 in. (50.8 x 152.4 mm) 10ga, Tee Joint - 2 x 6 in. (50.8 x 152.4 mm) 10ga, Three Pass T Joint 100/75/50, 1/4 x 3 x 8 in. (6.35 x 76.2 x 203.2 mm), 1/4 x 3 x 8 in. (6.35 x 76.2 x 203.2 mm), 3/8 x 8 x 7 in. (9.53 x 203.2 x 177.8 mm), Discontinuities Flash Cards

What's Included?

• DRAWER 1 - SMAW|T300 Electrode Holder|EH-305HD Magnum® Electrode Holder|200A Electrode Holder|GC-300 Work Clamp|3/32 in. (2.4 mm) Bare Stick Electrode Rod|1/8 in. (3.2 mm) Bare Stick Electrode Rod|5/32 in. (4.0 mm) Bare Stick Electrode Rod|Excalibur® 7018 MR 3/32 in. (2.4 mm) 1 lb Tube Stick Electrode|,DRAWER 2 - GTAW|PTA-17V Torch Body|PTA-17V Torch Body|PTA-17F Torch Body|PTA-17 Torch Handle|PTA-17 3/32 in. (2.4 mm) Collet|PTA-17 3/32 in. (2.4 mm) Collet Body|PTA-17 Backcap- Long|PTA-17 Alumina Nozzle #6|GLK-3 Basic TIG Kit|,DRAWER 3 - GMAW / FCAW|Magnum® PRO 550 Assembly|Magnum® PRO 250L Assembly|Flux-Cored/MIG Wire Drive Roll 0.035 - .045 in. (0.9 - 1.1 mm) Knurled|Drive Roll Kit Combination 0.035/.045 in. (0.9-1.1 mm) Solid Wire Smooth|Magnum® PRO MIG Gun Diffuser- 550A- Slip-On|Magnum® PRO Gas Nozzle 550A- Slip-On- Flush- 3/4 in. ID|Magnum® PRO Gas Nozzle 350A- Thread-On- Flush- 1/2 in. ID|Magnum® PRO Gas Nozzle 350A- Thread-On- Recessed- 1/2 in. ID|Magnum® PRO Bottleneck Gas Nozzle 350A- Thread-on- Flush- 1/2 in. ID|Magnum® PRO Gas Nozzle 350A- 1/8 In. Stickout- Thread-on- 1/2 in. ID|Magnum® PRO Gas Nozzle 350A- Flush- Thread-On- 3/8 in. ID|Magnum® PRO MIG Gun Diffuser- 350A- Slip-On|Magnum® PRO Gas Nozzle 350A- Flush- Slip-On- 1/2 in. ID|Magnum® PRO MIG Gun Diffuser- 350A- Extended Reach- Thread-On|Magnum® PRO Gas Nozzle 350A- Extended Reach- Thread-On- Recessed- 1/2 in. ID|Magnum® PRO Contact Tip 550A- 0.035 in Dia.|Magnum® PRO Contact Tip- 350A- Tapered- 0.035 in Dia.|Magnum® PRO 350 Gas Diffuser Thread-On|Magnum® PRO Barrel 550 Nozzle Assembly 550A- Thread-On-|Recessed- 5/8 in. ID|Magnum® PRO MIG Gun Diffuser- 550A- Thread-On|,DRAWER 4 - CUTTING|Tomahawk® LC40 Plasma Cutting Torch Assembly|Tomahawk® LC40 Electrode|Tomahawk® LC40 Swirl Ring|Tomahawk® LC40 Nozzle (40 A)|Cutaway Harris® Oxyfuel Torch|Cutaway Harris® Gas Regulator|Acetylene Heating Assembly|Acetylene Two-Piece Preheat Tip|Cutting Tip|,DRAWER 5 - WELD SAMPLES|Butt Joint - 2 x 6 in. (50.8 x 152.4 mm) 10ga|Corner Joint - 2 x 6 in. (50.8 x 152.4 mm) 10ga|Edge Joint - 2 x 6 in. (50.8 x 152.4 mm) 10ga|Lap Joint - 2 x 6 in. (50.8 x 152.4 mm) 10ga|Tee Joint - 2 x 6 in. (50.8 x 152.4 mm) 10ga|Three Pass T Joint 100/75/50 -1/4 x 3 x 8 in. (6.35 x 76.2 x 203.2 mm)|6 Pass Groove 100/83/66/50/33/16 -3/8 x 8 x 7 in. (9.53 x 203.2 x 177.8 mm)|Discontinuities Flash Cards

• Weight: 56.7 lb (25.7 kg)
• Product Dimensions: 26.5 x 18 x 34.5 in (673.1 x 457.2 x 876.3 mm)
• Electrode Rod Sizes: 3/32 in (2.4 mm), 1/8 in (3.2 mm), 5/32 in (4.0 mm)
• Stick Electrode Tube Size: 3/32 in (2.4 mm), 1 lb
• TIG Collet Size: 3/32 in (2.4 mm)
• Flux-Cored/MIG Wire Size: 0.035 - 0.045 in (0.9 - 1.1 mm)
• Contact Tip Diameter: 0.035 in
• Plasma Cutting Nozzle Amperage: 40 A
• Weld Sample Size: 2 x 6 in (50.8 x 152.4 mm), 10 gauge
• Three Pass T Joint Size: 1/4 x 3 x 8 in (6.35 x 76.2 x 203.2 mm)
• Six Pass Groove Size: 3/8 x 8 x 7 in (9.53 x 203.2 x 177.8 mm)
• Country of Origin: United States
• Work Clamp Included: No

Downloads