Harris Products Group, 95561/2POP, Lead-Free Solder, 95/5, .118 in diameter, 8 oz, ASTM B32 Alloy Sb-5

95-5 lead-free solid wire tin-antimony solder is a low temperature lead-free solder with a narrow melting range. It is primarily used for copper plumbing tubes, but can be used for other general soldering applications. The rapid melting characteristics require close fitting connections as it is difficult “bridge” or fill wide clearances. Conforms with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content requirements for “lead-free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws, and the US Safe Drinking Water Act amendments effective January 2014. Conforms to the EU Reach & RoHS directive.

Features

• Recommended for lead-free installation of smaller diameter, tight fitting connections
• Ideal for soldering copper plumbing tubes
• Meets NSF/ANSI Standard 61 for drinking water system components - health effects; Meets NSF/ANSI 372 for drinking water system components - lead content
• Higher electrical conductivity and high fluidity
• Not recommended for use on brass or HVAC connections
• Well suited for applications where moderately elevated temperature is a factor
• Low temperature lead-free solder with a narrow melting range

Applications

• Soldering copper plumbing tube or general soldering applications

• Liquidus: 464 F (240 C)
• Solidus: 452 F (233 C)
• Material: Lead-free Solder (Tin 94.5%-95.5%, Antimony 4.5%-5.5%)
• Diameter: 0.118 in (3 mm)
• Electrical Conductivity: 11.9 %IACS
• Compliance: ASTM B32 Alloy Sb-5; NSF/ANSI 61; NSF/ANSI 372; RoHS; EU Reach
• Color: Bright Silver
• Country of Origin: USA