Tweco, 12601637, Nozzle, EL22CT Series, 0.625" Bore, 3.018" Length, Flush Tip, Suitable for 250 A

Tweco® Brass Nozzle with 0.625" bore size is perfect for standard gas diffuser. 3.018" Nozzle with 0.875" OD making it ideal for use in light to medium duty welding application up to 250 A. It features part number rolled stamped on the external surface for easy identification. Nozzle with flush contact tip relationship 0.062" is made from copper alloy. It has a 3-piece design without an additional insulator includes a nozzle housing, which is cut and formed from 122 DHP copper alloys tubing, a nozzle insert machined from a solid brass and nozzle insulator constructed from silicone material. It has nozzle insert that allows machining of internal threads in order to match the gas diffuser. It features threads on the standard EL gas diffuser. Nozzle offers electrical insulation required from the gas diffuser using the nozzle insulator. Nozzle is sold as 2 per pack.

Applications

• Used in light to medium duty welding application up to 250 Amp

Features

• Protruding Tips are generally used when welding open root pipe or any joint that requires the welder to get into a tight weld joint. However the down side to this is the chance of arcing the tip to the work piece, which could damage front end parts resulting in downtime needed to replace
• Threads onto a standard EL gas diffuser
• Easy identification - part no rolled stamped on the outside surface
• Flush Tips are generally used where a shorter electrical stick-out is used sometimes resulting in shorter/tighter arc lengths, This brings the tip closer to the work piece
• 3-piece design - does not require an additional insulator
• Recessed Tips are generally used for higher heat applications where longer electrical stick-out is required, or in cases where the nozzle may touch the work piece (tack, spot, and stitch)
• Nozzle housing - cut and formed from 122 dhp copper alloy tubing
• Nozzle insulator - made from g7 silicone material, providing the electrical insulation needed from the gas diffuser
• Nozzle Insert - machined from a solid brass allow and machining the internal threads to match the gas diffuser

• Current Capacity: 250 A
• Tip Bore: 0.625 in
• Length: 3.018 in
• Outer Diameter: 0.9 in
• Wire Size: Flush to 1/16 in
• Tip/Nozzle Relationship: Flush | Recessed
• Consumable Type: Nozzle
• Material: Copper Alloy, Brass, Silicone
• Design: 3-piece
• Thread Compatibility: Standard EL Gas Diffuser
• Series: EL22CT Series
• Country of Origin: United States
• MIG Gun Model: Tweco , Tweco Eliminator