ESAB, 0558102554, Multi-Process Welder, 285A @ 40% Duty Cycle, 120/230 V, Single Phase, 0.023" - 1/16" Wire Size

The ESAB® Rebel™ EMP 285ic Single Phase systems is the most powerful industrial Rebel yet for excellent performance on MIG Flux-Cored TIG and Stick applications. Capable of welding up to 350A this TRUE multi-process multi-voltage industrial welding machine runs the full range of .035 in. (0.9 mm) and .045 in. (1.2 mm) wires. It's the most portable mobile welder in its class and has the power and performance to crush even the most demanding industrial jobs.

Features

• With ESAB’s new 4 Roll Drive System, weld up to .052 in. (1.4 mm) solid wire and up to 1/16 in.(1.6 mm) cored wire. Plus, electrodes up to 5/32 in. (4.0 mm) and TIG rods up to 3/16 in. (5.0 mm).
• CSA
• 100% Satisfaction Guarantee
• Power to Perform – with 285A @ 40% (1ph model) you’ll have the confidence to run the full range of .045 in. (1.2 mm) wire, short arc and spray transfer, with increased deposition rates and higher productivity on smaller diameter wires such as .030 in. (0.8 mm) and .035 in. (0.9 mm).
• 3 Year Warranty
• TFT Multilingual Display – packed full of features, Rebel EMP 285ic has 4 programmable memory locations for each process, multi-language selection, trim adjustment, inductance control, pre/post flow control and spot weld setting giving you the ability to fine tune your welds for the most optimal performance.
• Unmatched Portability/Mobility – weighing in at 70 lbs. (32 kg) with multi-voltage, multi-phase capability and 4 handle roll cage. Detach the Rebel EMP 285ic from its cart and tackle any job around the shop or out at the job site.
• sMIG Technology – innovative “smart-MIG” feature that dynamically monitors the arc characteristics ultimately adapting to your technique resulting in a smooth, stable arc. Set wire diameter and plate thickness and you are ready to weld.

Applications

• Industrial And General Fabrication
• Construction
• Agricultural Equipment
• Maintenance And Repair
• Automotive

Accessories

• Power Adapter - 230V to 120V, 15A W4014000
• Tweco 200A Spool Gun, 12 ft. (3.6 m) 1027-1398
• Spray Master Velocity 250V MIG Gun, 15 ft. (4.5 m) 1023-1277
• Spray Master Velocity 350V MIG Gun, 15 ft. (4.5 m) 1036-1756
• Tweco Ground Clamp w/Lead, 10 ft. (3 m), 50 mm Dinse WS200G10
• Rebel Single Cylinder Cart 0558102491
• ESAB TXH 201 5/8 npt 12.5 ft. (3.8 m) TIG Torch Outfit 0558102493
• Foot Control, 15 ft. (4.6 m) cable and 8-pin Male Plug W4014450
• Victor HRF 1425-580 Regulator/Flowmeter 0781-2743
• Electrode Holder 200A and Lead Assembly, 13 ft. (4 m), 50 mm WS200E13

Prop 65

• Yes

• Amperage: 5 - 300 A, 285 A @ 40% duty cycle
• Voltage: 120 V / 230 V
• Phase: Single Phase
• Duty Cycle: 285 A at 28.25 V - 40% (MIG/Flux Cored - 230 VAC), varied for other processes
• Wire Size: 0.023 in 1/16 in (0.030 in, 0.035 in, 0.045 in, 0.052 in), Cored Wire 1/16 in (1.6 mm)
• Electrode Size: 5/32 in (4.0 mm)
• TIG Rod Size: 3/16 in (5.0 mm)
• Maximum Plate Thickness: 1/2 in.
• Wire Spool Size: 4 in, 8 in, 12 in
• Wire Feed Speed: 60 - 800 ipm
• Output Mode: CC/CV
• Input Frequency: 50/60 Hz
• Physical Size (LxWxH): 26.5 x 11.5 x 19.5 in.
• Weight: 70 lbs (32 kg)
• Process: Stick (SMAW), Flux Cored (FCAW), MIG (GMAW), TIG DC (GTAW)
• Country of Origin: China
• Compliance: CSA Certified