Washington Alloy, TT 90S-B3 07, Filler Wire, ER90S-B3, 5/32 in, 36 in, 90,000 psi min tensile strength

90S-B3 is a low alloy fillerdesigned to produce high strengths on2 1/4 & Cr-1 Mo steels found in high temperature/high pressure piping and vessels. It may also be used on carbon steels to Cr-Mo base metals. Controlled preheat, interpass and postheat treatment may be needed to avoid cracking.

• Alloy: ER90S-B3
• Size: 5/32 in.
• Weight: 10 LB
• Compliance: ANSI/AWS A5.28 ER90S-B3, ASME SFA 5.28 ER90S-B3
• Tensile Strength: 90,000 psi minimum
• Yield Strength: 78,000 psi minimum
• Elongation (2 inch): 17% minimum
• Typical Tensile Strength: 94,500 psi
• Typical Yield Strength: 80,500 psi
• Typical Elongation: 19%
• Carbon Content: 0.07-0.12%
• Manganese Content: 0.40-0.70%
• Silicon Content: 0.40-0.70%
• Phosphorus Max: 0.025%
• Sulfur Max: 0.025%
• Molybdenum Content: 0.90-1.20%
• Nickel Max: 0.20%
• Chromium Content: 2.30-2.70%
• Copper Max: 0.35%
• Length: 36 in
• Base Metals: 2 1/4 Cr, Cr-1 Mo, Carbon steels to Cr-Mo
• Controlled Heat Treatment: Preheat, Interpass, Postheat

Downloads