Submerged Arc DC Wire Feeder The LT-7 Tractor is a self-propelled mechanized wire feeder, designed for the submerged arc process with track system capabilities. It is self-guiding and easy to operate – only one operator is usually required. It is designed to be used with a variety of Lincoln DC constant voltage and constant current power sources. The rugged, lightweight unit permits quick movement to the next joint. Its compact size fits through small openings and confined spaces. Butt and fillet welds can be made on heavy plate or steel as light as 12 gauge (2.5mm). The LT-7 Tractor is ideal for the following applications: ship and barge building, storage tank erection, bridge deck installation, beam, girder or column fabrication, and long seams on heavy weldments. LT-7 Tractor feeds 3/32 to 3/16"" (2.4 to 4.8 mm) solid wires, from 100 - 400 inches per minute (2.5 - 10.2 m/min) wire feed speed. Calibrated tractor drive adjusts travel speeds from 6 to 70 inches per minute (0.12 to 1.8 m/min). Vertical head lift adjuster for adjusting electrical Stick-out from 1/2 in. to 5 in. (12.7 to 127.0 mm). Weld angle is up to 50° from vertical on either side; drag angle is up to 30° from vertical. Control box is conveniently located on the tractor (can be mounted either left or right), eliminating the need to return to the power source for routine procedure changes. Exceptional tracking control and self-steering in most applications leave the operator free for quality control, joint cleaning and flux handling. Welds butts, horizontal fillet and lap joints to the left or right side of the tractor frame for convenience. Close mechanical alignment between wire and joint maximizes weld quality with no fixturing costs. Three-year warranty on parts and labor.
What's Included?
- K1822-25 - 25 ft control cable
Features
- Exceptional tracking control and self-steering in most applications leave the operator free for quality control, joint cleaning and flux handling.
- Welds butts, horizontal fillet and lap joints to the left or right side of the tractor frame for convenience.
- Vertical head lift adjuster for adjusting electrical Stick-out from 1/2 in. to 5 in. (12.7 to 127.0 mm).
- Control box is conveniently located on the tractor (can be mounted either left or right), eliminating the need to return to the power source for routine procedure changes.
- LT-7 Tractor feeds 3/32 to 3/16"" (2.4 to 4.8 mm) solid wires, from 100 - 400 inches per minute (2.5 - 10.2 m/min) wire feed speed.
- Calibrated tractor drive adjusts travel speeds from 6 to 70 inches per minute (0.12 to 1.8 m/min).
- Weld angle is up to 50° from vertical on either side; drag angle is up to 30° from vertical.
- Close mechanical alignment between wire and joint maximizes weld quality with no fixturing costs.
-
Rated Output: 600A/100%
-
Max Rating: 1100A with water cooling
-
Input Voltage: 115VAC
-
Input Current: 600A
-
Input Hertz: 50/60 Hz
-
Wire Size: 3/32 to 3/16 in (2.4 to 4.8 mm)
-
Max Wire Diameter (Solid): 3/16 in (4.8 mm)
-
Wire Feed Speed: 100 to 400 in/min (2.5 to 10.2 m/min)
-
Travel Speed: 6 to 70 in/min (0.12 to 1.8 m/min)
-
Stick-Out Adjustment: 0.5 to 5 in (12.7 to 127 mm)
-
Weld Angle: Up to 50 from vertical
-
Drag Angle: Up to 30 from vertical
-
Length: 14 in (356 mm)
-
Width: 33 in (838 mm)
-
Height: 27.5 in (698 mm)
-
Weight: 130 lb (58.97 kg)
-
Max Spool Size: 60 lb (30 kg)
-
Feedhead Configuration: Single
-
Work Lead Connector Type: Lug
-
Power Source to Feeder Communication Connector Type: 9-pin
-
Communication Technology: Analog
-
Work Clamp Included: No
-
Machines Processes: Submerged Arc (SAW)
-
Arclink Connector: No
-
Accessories Communication Connector Type: None
-
Feeder Type: Automatic
-
UI Type: Meters
-
Country of Origin: United States
-
Warranty Length: 3 Years
-
Control Cable Length: 25 ft (7.62 m)
Downloads
Brochure
