Stoody, 11892000, Flux-Cored Welding Wire, 0.045 in; Stainless Steel, E2209T1-X, 130-220 Amps

Stoody ® AP stainless steel wires are designed for welding in all positions with either 100% CO2 (X=1) or Argon / CO2 (X=4) gas mixtures. These wires exhibit a spray like arc transfer, easy slag removal and can be welded within a wide range of parameters. Stoody ® 2209T-1 AP wires can be used to weld duplex stainless steels which contain approximately 22% chromium. The composition is balanced to achieve a good balance of corrosion resistance and mechanical properties.

Prop 65

• Yes

• Amperage: 130 Amps - 220 Amps
• Diameter: 0.045 in
• Material: Stainless Steel
• AWS Classification: E2209T1-X (A5.22:2010)
• Process: FCAW
• Trade Name: STOODY 2209 T-1 AP
• Carcinogen: Nickel
• Country of Origin: United States
• Reproductive: Dual Short Form
• Gas Mixtures: 100% CO2, Argon/CO2
• Chromium Content: 22%
• Ferrite Number: 40
• Tensile Strength: 114 Ksi (786 MPa)
• Yield Strength: 88 Ksi (607 MPa)
• Elongation: 27.5%
• Charpy Impact Toughness: 44 ft-lbs (60 Joules) @ -40 F (-40 C)
• Lateral Expansion: 32 mils (0.81 mm) @ -40 F (-40 C)
• Transverse Tensile Strength: 112 Ksi (773 MPa)
• Transverse Yield Strength: 87 Ksi (600 MPa)
• Transverse Elongation: 28.5%
• Test Method: ASTM G48 - Method A
• Corrosive Medium: Ferric Chloride (FeCl3)
• Test Temperature: 22 C (72 F)
• Test Duration: 72 Hours
• Mass Loss per Area: 0.000281 g/cm2
• Side Bend Test: Pass