Harris Products Group, 308LT503POP, Welding Rod, 3/32 in; 36 in; Stainless Steel Alloy; Yield Strength 57,000 psi

308L stainless steel GTAW (TIG) welding alloy is most frequently used for welding base metals of similar composition. The 0.03% maximum carbon content increases its resistance to intergranular corrosion. Conforms to AWS A5.9. Conveniently packaged for point-of-purchase display.

Applications

• Welding base metals of similar composition

Features

• Embossed on each end for easy identification after use
• Welds base metals of similar composition
• Lower carbon content (.03% max.) resists carbide precipitation that can cause weld corrosion
• One year warranty

Notes

• All parameters are suggested as basic guidelines and will vary depending on joint design, number of passes and other factors.

• Yield Strength: 57,000 psi (as welded)
• Tensile Strength: 87,000 psi (as welded)
• Elongation: 34% (as welded)
• Reduction of Area: 56% (as welded)
• Brinell Hardness: 160 HB (as welded)
• Rockwell B Hardness: 85 HRB (as welded)
• Charpy V-notch: 100 ft./lb. @ room temp (as welded)
• Diameter: 3/32 in. (2.38 mm)
• Length: 36 in. (914.4 mm)
• Material: Stainless Steel alloy
• Weld Material: Stainless Steel alloy
• Chemical Composition: C 0.03% max.; Ni 9.0-11.0%; Cu 0.75% max.; P 0.03% max.; Mo 0.75% max.; Cr 19.5-22.0%; Mn 1.0-2.5%; Si 0.30-0.65% max.; S 0.03% max.; Fe remainder; Ferrite 5-12
• Polarity: DCSP - Electrode negative
• Shielding Gas: Argon
• Classification: ANSI/AWS A5.9; ASME SFA 5.9 ER 308L
• Compliance: AWS A5.9
• Corrosion Resistance: Intergranular corrosion resistant
• RoHS Compliant: No
• Country of Origin: Taiwan

Downloads