Miller Electric, 951843, MIG Welder, Invision, 1- and 3-Phase, XR-Aluma-Pro Plus, 25 ft

MIG and synergic Pulsed MIG system with optimized weld programs for both steel and aluminum.

Features

• Recommended Aluminum Solutions: Dedicated XR™-Pistol Plus and XR-Aluma-Pro™ Plus guns work with the 74 MPa Plus feeder to coordinate wire feed speed of the gun and the feeder. This provides optimized aluminum feeding and welding performance.
• Profile Pulse™: Provides TIG appearance with MIG simplicity and productivity. Achieve “stacked dimes” without gun manipulation. Profile Pulse frequency can be changed to increase or decrease the spacing between the ripple pattern to achieve the desired weld appearance.
• Fan-On-Demand™: Power source cooling system operates only when needed, reducing noise, energy use, and the amount of contaminants pulled through machine.
• Wind Tunnel Technology™: Internal air flow that protects internal components from dirt, dust, debris— greatly improving reliability.
• Auto-Line™ Technology: Allows hookup to either single-phase or three-phase primary input voltage, 208-600 volts dependent on the machine, with no manual linking, providing convenience in any job setting. An ideal solution for dirty or unreliable input power.
• Built-in MIG and Pulsed MIG programs: Automatically set the optimal parameters for a wide variety of wires making it easy to set up and use.
• SharpArc® Technology: Controls the arc in Pulsed MIG (GMAW-P) welding and gives total control over the arc cone shape, puddle fluidity, and bead profile.
• Insight Banner: Insight compatible to monitor weld voltage, amperage, and arc-time and percentage.

• Input Power: 208-575 V, 1- or 3-phase, 50/60 Hz, Auto-LineTM
• Rated Output: 5-425 A, 10-38 V, 350 A at 34 VDC, 60% duty cycle
• Max Open-Circuit Voltage: 75 VDC
• Dimensions: 17 in. H x 12.5 in. W x 24 in. D (432 mm x 318 mm x 610 mm)
• Net Weight: 80 lb. (36.3 kg)
• Wire Feed Speed: 50-780 ipm (1.3-19.8 m/min.)
• Wire Diameter Capacity: .023-5/64 in. (0.6-2.0 mm), .035-1/16 in. (0.9-1.6 mm) aluminum
• Gun Model: XR-Aluma-Pro Plus 25 ft., air-cooled
• Wire Feeder Model: S-74 MPa Plus Single-Wire Feeder
• Weight of Wire Feeder: 48 lb. (21.2 kg)
• Cooling System: Fan-On-DemandTM
• Arc Control Technology: SharpArc Pulsed MIG
• Built-in Programs: MIG and Pulsed MIG for steel, aluminum, stainless steel, nickel, silicon bronze, copper nickel
• Power Source Features: Auto-LineTM Technology, Wind Tunnel TechnologyTM, Fan-On-DemandTM, Insight compatible
• Compliance: Certified by Canadian Standards Association to U.S. and Canadian Standards
• Input Phase: 1- and 3-Phase
• Country of Origin: United States
• Series: Invision

Downloads