Miller Electric, 951411, MIG Welder, Invision Series, 1- and 3-Phase, Bernard BTB 400 A, 15 ft

MIG and synergic Pulsed MIG system with optimized weld programs for both steel and aluminum.

Features

• Recommended Aluminum Solutions: Dedicated XR™-Pistol Plus and XR-Aluma-Pro™ Plus guns work with the 74 MPa Plus feeder to coordinate wire feed speed of the gun and the feeder. This provides optimized aluminum feeding and welding performance.
• SharpArc® Technology: Controls the arc in Pulsed MIG (GMAW-P) welding and gives total control over the arc cone shape, puddle fluidity, and bead profile.
• Fan-On-Demand™: Power source cooling system operates only when needed, reducing noise, energy use, and the amount of contaminants pulled through machine.
• Wind Tunnel Technology™: Internal air flow that protects internal components from dirt, dust, debris— greatly improving reliability.
• Built-in MIG and Pulsed MIG programs: Automatically set the optimal parameters for a wide variety of wires making it easy to set up and use.
• Auto-Line™ Technology: Allows hookup to either single-phase or three-phase primary input voltage, 208-600 volts dependent on the machine, with no manual linking, providing convenience in any job setting. An ideal solution for dirty or unreliable input power.
• Profile Pulse™: Provides TIG appearance with MIG simplicity and productivity. Achieve “stacked dimes” without gun manipulation. Profile Pulse frequency can be changed to increase or decrease the spacing between the ripple pattern to achieve the desired weld appearance.
• Synergic Pulsed MIG: As wire speed increases/decreases, pulse parameters also increase/decrease to match the right amount of power needed, eliminating the need to make additional adjustments.

• Input Phase: 1- and 3-Phase
• Input Power: 208-575 V, 50/60 Hz
• Rated Output: 350 A at 34 V, 60% duty cycle
• CC Mode Output Range: 5-425 A
• CV Mode Output Range: 10-38 V
• Max Open-Circuit Voltage: 75 VDC
• Power: 13.6 kW
• Apparent Power: 14.2 KVA
• Net Weight: 80 lb (36.3 kg)
• Dimensions: H: 17 in, W: 12.5 in, D: 24 in
• Wire Feeder Type: S-74 MPa Plus single-wire feeder
• Wire Feed Speed: 50-780 ipm (1.3-19.8 m/min)
• Wire Type and Diameter Capacity: .023-5/64 in (0.6-2.0 mm), .035-1/16 in (0.9-1.6 mm) aluminum
• Wire Feeder Net Weight: 48 lb (21.2 kg)
• Wire Feeder Dimensions: H: 14 in, W: 12.5 in, D: 28 in
• Push-Pull Gun Length: 15 ft
• Processes: MIG (GMAW), Pulsed MIG (GMAW-P), Flux-cored (FCAW), Air carbon arc cutting and gouging (CAC-A)
• Heavy Industrial Applications: Railroad, Truck/trailer manufacturing, Light gauge and tube, Lawn and garden equipment, Recreational vehicles
• Compliance: CSA Certified to US and Canadian standards
• Series: Invision
• Country of Origin: United States

Downloads