Miller Electric, 907780, Multiprocess Welder, 20 A - 235 A; 240 V; 15 ft MDX-250 MIG gun; 4.3 in LCD display

An efficient multi-process welder curated for professionals and welders of all experience levels to grow skills in MIG, flux cored, stick, and DC TIG welding. Quick and easy setup allows operators to have faster uptime and weld with confidence.

Includes

• 15 ft. (4.5 m) 250-amp MDX™-250 MIG gun w/ Bernard® AccuLock™ MDX consumables for .030/.035 in. (0.8/0.9 mm) wire
• Flow gauge regulator and gas hose for argon or AR/CO2 mix
• .030/.035 in. (0.8/0.9 mm) reversible drive rolls
• Material Thickness Gauge
• Extra contact tips
• 10 ft. (3 m) work cable w/clamp & 50 mm Dinse-style connector
• Power source with 7 ft. (2.1 m) power cord
• 10 ft. (3 m) cable w/electrode holder & 50 mm Dinse-style connector

Features

• AccuLock liner loads from the front and locks at the front and back to insure proper alignment for flawless wire feed path. New rubber overmold and ball -and-socket handle design improves grip and reduces welder fatigue. New Industrial Bernard AccuLock™ MDX contact tips provide superior MIG arc performance.
• 4.3-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time
• Weight is reduced to make it easier to take the welder to where the work is, plus the added convenience of one machine versus two or more.
• Multiprocess Capabilities of MIG, Flux Cored, DC Lift Arc TIG and DC Pulsed TIG
• Operators no longer need to use lift truck to load machine and running gear into the truck. Latches secure machine to running gear. Simply loosen the latch retaining knob and rotate latches to disengage machine from running gear for easy portability
• Millers Gun-On-Demand™ allows operators to simply pull the trigger on MIG gun or Spoolgun. Automatically detects and recalls the voltage, wire feed speed of the active gun.
• The Multimatic 235 will be able to operate and provide full output when powered by generators with 10000 Watt (10K) output or higher, such as a Miller Bobcat or Trailblazer series generator. Limited output will occur when used with smaller generators.
• Offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels.

Does Not Include

• Shielding gas (for welding with solid wire [GMAW])
• Spool Gun (for welding aluminum)
• Flux cored drive rolls (for welding with flux cored wire [FCAW])
• Welding wire
• Personal safety products (helmet, gloves)

• Amperage Range: 20 A - 235 A
• Input Voltage: 208 V, 220/230/240 V
• Amperage Max (A): 235 A
• Max Open Circuit Voltage: 54 VDC
• Min Wire Feed Speed: 60 IPM (1.5 m/min)
• Max Wire Feed Speed: 600 IPM (15.2 m/min)
• Rated Output: CV: MIG/Flux 170 A at 22.5 V 60% duty cycle | CC: Stick 150 A at 26 V 60% duty cycle | CC: DC TIG 180 A at 17.2 V 60% duty cycle
• Current Type: DC
• Welding Mode: CC / CV
• Material Thickness Range: Mild Steel 24 ga. - 3/8 in. | Aluminum 18 ga. - 3/8 in.
• Weldable Metals: Aluminum, Stainless Steel, Steel
• Spool Size: 12 in.
• Cable Length: 15 ft
• Work Cable Length: 10 ft
• Power Cord Length: 7 ft
• Drive Roll Wire Size: 0.030 in, 0.035 in (0.8 mm, 0.9 mm)
• Connector Type: 50 mm Dinse-style
• Input Frequency: 50/60 Hz
• Input Phase: 1-Phase
• Multiprocess Capability: MIG, Flux Cored, DC Lift Arc TIG, DC Pulsed TIG
• Country of Origin: United States

Downloads