Tweco, 15601116, Gas Diffuser, 14H/M12 Series, 0.062 in, 2.521 in, Brass, 600 A

Tweco® Eliminator® Series Brass Gas Diffuser is perfect for use with course thread nozzle assemblies with 600 A Tweco® Eliminator® MIG gun series as well as eliminator front-end consumables. Gas diffuser has magnificent electrical properties making it ideal for use in light to medium duty standard welding application up to 600 A. 2.521" Gas diffuser with M12 x 1.5-6g thread size has six 0.094" gas holes. It features conduit liner up to 1/16" wire with a silicon O-ring to provide secure sealing against the nozzle assembly. It features a course thread that is machined on the external surface to let the nozzle assemblies to thread over and accommodate the nozzle in place during the welding process. It features part number rolled stamped on the external surface and overall length with replacement O-ring number for easy identification. Gas diffuser is made from 360-brass alloy bar stock offers consistent dimensional stability. It has a proper threaded size conductor tube to be used with MIG guns. Gas diffuser is sold as 5 per pack.

Features

• Machined from 360 brass alloy bar stock to ensure consistent dimensional stability
• Recessed Tips are generally used for higher heat applications where longer electrical stick-out is required, or in cases where the nozzle may touch the work piece (tack, spot, and stitch)
• Gas diffuser has a silicon o-ring to seal against the nozzle assembly
• Replacement O-ring Part No EL54-1 (Stock No 1560-1118)
• However the down side to this is the chance of arcing the tip to the work piece, which could damage front end parts resulting in downtime needed to replace
• Flush Tips are generally used where a shorter electrical stick-out is used sometimes resulting in shorter/tighter arc lengths, this brings the tip closer to the work piece
• A course thread is machined on the outside surface to allow the nozzle assemblies to thread over holding the nozzle in place during the welding process
• Designed to be used with course thread nozzle assemblies
• Easy identification - part no rolled stamped on the outside surface
• Protruding Tips are generally used when welding open root pipe or any joint that requires the welder to get into a tight weld joint

Applications

• Used in light to medium duty welding application up to 600 Amp

• Amperage: 600 A
• Length: 2.521 in
• Wire Size: 0.062 in
• Thread Size: M12 x 1.5-6g
• Material: Brass, 360 Brass Alloy
• O-ring Material: Silicon
• Gas Hole Diameter: 0.094 in
• MIG Gun Model: Tweco Eliminator
• Series: 14H | M12 Series
• Consumable Type: Gas Diffuser
• Physical Size: 0.6 x 2.3 x 0.6 in
• Country of Origin: United States